Soft drain pipes are usually supported by rust-proof spring coils to form a highly pressure-resistant soft structure. The interior is equipped with a cloth lining filter to prevent mud and sand impurities from entering the pipe to achieve the purpose of net water seepage. The outside of the pipe is wrapped with a polyester silk coating, which has good water absorption and can quickly collect excess water in the soil. At the same time, the rubber tendons make the pipe wall coating tightly combined with the spring coil body to ensure that the pipeline has a full range of water permeability.
The outer layer of soft drain pipes is mainly made of PVC, PE, and PP. Among them, soft drain pipes made of PVC have excellent flexibility and corrosion resistance and a long service life. Soft drain pipes made of PE have good toughness and elasticity and can withstand most chemical liquids and gases. Soft drain pipes made of PP have the characteristics of high temperature resistance, pressure resistance, penetration resistance, and good barrier properties, and are suitable for harsher working environments.
✦Advantages of Composite Drain Mat
Easy installation: The installation of soft drain pipes is very simple, without welding and bonding, and can be completed by using special joints, which greatly saves installation time and cost.
High strength: By adding reinforcing materials such as wire mesh, the strength of soft drainage pipes has been significantly improved, and they can withstand greater pressure and tension, and are suitable for various complex environment
Strong corrosion resistance : Since the inner layer of the soft drain pipes is often made of corrosion-resistant materials such as PVC, and the outer layer may be reinforced with structures such as wire mesh, it has strong corrosion resistance and is suitable for the discharge and transportation of corrosive media such as acids, alkalis, and salts
Good water permeability : Some soft drain pipes are designed to allow water to penetrate through the pipe wall, thereby effectively removing excess water and preventing water accumulation and waterlogging. It is particularly suitable for occasions where drainage is required
Soft texture : Soft drain pipes are usually soft in texture, can adapt to ground settlement and deformation, have good integration with the land and other environments, and are easy to construct and install
HDPE Pipes for Portable Water & Natural Gas
HDPE Pipe for Gaseous Fuels and Natural Gas
Electrofusion welding
Butt fusion welding
Socket fusion welding
Quick fittings connection
Saddle welding
Flange connection
✦HDPE Fittings Manufacturerd and Supplied together with our HDPE Pipes
ISO 4427-2: Plastics piping systems. Polyethylene pipes & fittings for water supply – Part 2: Pipes
EN 12201-2: Plastics piping systems for water supply – Polyethylene – Part 2: Pipes
EN 1555-2: Plastics piping systems for the supply of gaseous fuels – Polyethylene – Part 2: Pipes
ISO 4437-2: Plastics piping systems for the supply of gaseous fuels – Polyethylene – Part 2: Pipes
ISO Size and Dimension Data
Henan Bingo Pipeline ISO HDPE Series
Pressure Ratings are calculated using a 1,25 design coefficient (C) for MRS at 20°C as listed in PPI TR-4 for PE 100 materials. Pressure ratings are based on water applications. Temperature, Chemical, and Environmental use considerations may require use of additional design coefficients.
ISO 4427 Pipe Series
S 3.2
S 4
S 5
S 6,3
S 8
S 10
S 12,5
S 16
ASTM F714 DR
DR 7.4
DR 9
DR 11
DR 13.6
DR 17
DR 21
DR 26
DR 33
Nominal Pressure PE 100
PN = 25 bar
PN = 20 bar
PN = 16 bar
PN = 12,5 bar
PN = 10 bar
PN = 8 bar
PN = 6 bar
PN = 5 bar
Nominal Size DN (mm)
Equiv Size (in)
Min Wall (mm)
Average ID (mm)
Min Wall (mm)
Average ID (mm)
Min Wall (mm)
Average ID (mm)
Min Wall (mm)
Average ID (mm)
Min Wall (mm)
Average ID (mm)
Min Wall (mm)
Average ID (mm)
Min Wall (mm)
Average ID (mm)
Min Wall (mm)
Average ID (mm)
20
0.79
3.0
13.6
2.3
15.12
2.0
15.76
1.5
16.88
1.2
17.51
1.0
17.98
0.6
18.72
0.61
18.72
25
0.98
3.5
17.60
3.0
18.64
2.3
20.12
2.0
20.76
1.5
21.88
1.2
22.48
0.8
23.39
0.76
23.39
32
1.26
4.4
22.70
3.6
24.37
3.0
25.64
2.4
26.91
2.0
27.76
1.5
28.77
1.0
29.94
0.97
29.94
40
1.57
5.5
28.30
4.5
30.46
3.7
32.16
3.0
33.64
2.4
34.91
2.0
35.76
1.2
37.43
1.21
37.43
50
1.97
6.9
35.40
5.6
38.13
4.6
40.25
3.7
42.16
3.0
43.64
2.4
44.91
2.0
45.76
1.52
46.79
63
2.48
8.6
44.80
7.1
47.95
5.8
50.70
4.7
53.04
3.8
54.94
3.0
56.64
2.5
57.70
1.91
58.95
75
2.95
10.3
53.20
8.4
57.19
6.8
60.58
5.6
63.13
4.5
65.46
3.6
67.37
2.9
68.85
2.27
70.18
90
3.54
12.3
63.90
10.1
68.59
8.2
72.62
6.7
75.80
5.4
78.55
4.3
80.88
3.5
82.58
2.73
84.22
110
4.33
15.1
78.00
12.3
83.92
10.0
88.80
8.1
92.83
6.6
96.01
5.3
98.76
4.2
101.10
3.33
102.93
125
4.92
17.1
88.70
14.0
95.32
11.4
100.83
9.2
105.50
7.4
109.31
6.0
112.28
4.8
114.82
3.79
116.97
140
5.51
19.2
99.30
15.7
106.72
12.7
113.08
10.3
118.16
8.3
122.40
6.7
125.80
5.4
128.55
4.24
131.01
160
6.30
21.9
113.60
17.9
122.05
14.6
129.05
11.8
134.98
9.5
139.86
7.7
143.68
6.2
146.86
4.85
149.72
180
7.09
24.6
127.80
20.1
137.39
16.4
145.23
13.3
151.80
10.7
157.32
8.6
161.77
6.9
165.37
5.45
168.44
200
7.87
27.4
141.90
22.4
152.51
18.2
161.42
14.7
168.84
11.9
174.77
9.6
179.65
7.7
183.68
6.06
187.15
225
8.86
30.8
159.70
25.2
171.58
20.5
181.54
16.6
189.81
13.4
196.59
10.8
202.10
8.6
206.77
6.82
210.55
250
9.84
34.2
177.50
27.9
190.85
22.7
201.88
18.4
210.99
14.8
218.62
11.9
224.77
9.6
229.65
7.58
233.94
280
11.02
38.3
198.80
31.3
213.64
25.4
226.15
20.6
236.33
16.6
244.81
13.4
251.59
10.7
257.32
8.48
262.01
315
12.40
43.1
223.60
35.2
240.38
28.6
254.37
23.2
265.82
18.7
275.36
15.0
283.20
12.1
289.35
9.70
294.44
355
13.98
48.5
252.20
39.7
270.84
32.2
286.74
26.1
299.67
21.1
310.27
16.9
319.17
13.6
326.17
10.90
331.89
400
15.75
54.7
284.00
44.7
305.24
36.3
323.04
29.4
337.67
23.7
349.76
19.1
359.51
15.3
367.56
12.30
373.92
450
17.72
61.5
319.60
50.3
343.36
40.9
363.29
33.1
379.83
26.7
393.40
21.5
404.42
17.2
413.54
13.80
420.74
500
19.69
67.6
356.70
55.8
381.70
45.4
403.75
36.8
421.98
29.7
437.04
23.9
449.33
19.1
459.51
15.30
467.56
560
22.05
75.7
399.50
62.5
427.50
50.8
452.30
41.2
472.66
33.2
489.62
26.7
503.40
21.4
514.63
17.20
523.54
630
24.80
85.1
449.60
70.3
480.96
57.2
508.74
46.3
531.84
37.4
550.71
30.0
566.40
24.1
578.91
19.30
589.08
710
27.95
95.9
506.70
79.3
541.88
64.5
573.26
52.2
599.34
42.1
620.75
33.9
638.13
27.2
652.34
21.80
663.78
800
31.50
108.1
583.8
89.3
610.68
72.6
646.09
58.8
675.34
47.4
699.51
38.1
719.23
30.6
735.13
24.50
748.06
900
35.43
126.62
646.76
100.0
700.00
81.7
726.80
66.2
759.66
53.3
787.00
42.9
809.05
34.4
827.07
27.60
841.49
1000
39.37
135.14
729.72
111.12
777.76
90.2
808.78
72.5
846.30
59.3
874.28
47.7
898.88
38.2
919.02
30.60
935.13
1200
47.24
162.16
875.68
133.34
933.32
109.1
981.82
88.2
1013.02
67.9
1056.05
57.2
1078.74
45.9
1102.69
36.70
1122.20
1400
55.12
189.19
1021.62
155.56
1088.88
127.3
1145.46
102.9
1181.85
82.4
1225.31
66.7
1258.60
53.5
1286.58
42.90
1309.05
This product flyer is intended for reference purposes. It should not be used in place of the advice from a licensed Professional Engineer. Nominal pressure (PN) is based on C = 1,25 and an operating temperature of 20°C. Weight is calculated using DN and Minimum wall plus 6% for use in estimating fluid flow. Actual ID will vary. When designing components to fit the pipe ID, refer to pipe dimensions and tolerances in the applicable pipe manufacturing specification. To obtain pressure in psi, multiply bar by 14.5 (1 bar ≈ 14.5 psi). Additional information is available at www.bingopipes.com.
Other specifications have not been shown on our dimension chart, please CONTACT US for more information
Soft drain pipes are widely used in highway green belts, retaining wall drainage, industrial drainage, building drainage, environmental protection industry, agricultural irrigation drainage and other fields due to their lightness, permeability and good flexibility.
Underground drainage system: underground parking lot, basement drainage, subway drainage, etc. These occasions require drainage pipes to have certain flexibility and adaptability to cope with the complexity and changeability of the underground environment.
Internal drainage of buildings: suitable for drainage systems in buildings such as communities, schools, hospitals, shopping malls, etc., especially those that need to cope with certain displacements or deformations. The economy and effectiveness of soft drain pipes are fully reflected in these occasions.
Temporary or emergency drainage: In temporary or emergency situations such as sudden floods and unblocking drainage pipes, soft drain pipes can be quickly put into use and shorten the construction period due to their easy installation and maintenance.
Civil and water conservancy engineering drainage: including vertical and horizontal drainage on the back of various retaining walls, drainage of highway and railway roadbeds and shoulders, drainage of soft soil foundations, drainage of tunnels and underground passages, etc. These projects often require effective removal of seepage and groundwater from the soil, rock foundation and other projects themselves to ensure the stability and safety of the project.
Agricultural and horticultural irrigation: In agricultural irrigation systems, soft drain pipes can be flexibly arranged to adapt to different terrains and irrigation needs. At the same time, they also play an important role in roof gardens, flower beds, drainage, and soil and water conservation on hillsides.
